DIY Electric Tide Axolotl 💙💚| Resin Art Using T-Rex Inks & Eye Candy Pigment Paste

Описание: Step-by-Step Tutorial

1. Prep Your Mold
• I used an axolotl mold from Amazon — make sure it’s clean, dry, and free of any lint or dust.
2. Mix the Resin
• Combine equal parts of Craft Resin A & B, and mix thoroughly for 7 minutes until clear. Avoid over-mixing or mixing fast to prevent bubbles.
3. Prepare Your Colors
• In separate cups, mix:
💙 T-Rex shimmer blue alcohol ink for that ocean shine
💚 Neon green WC Ink (found off TikTok — now discontinued, making it extra special)
⚪ White pigment paste from Eye Candy for depth and contrast
4. Pouring Process
• Start by pouring small amounts of each color into different sections of the axolotl mold.
• Gently swirl the colors using a stick or toothpick to create that flowing, wave-like blend.
• Alternate between the shimmer blue and neon green for a glowing ocean-meets-jungle vibe.
5. Curing
• Allow the piece to cure completely (typically 24 hours) in a dust-free space.
6. Demolding
• Once fully cured, carefully remove your axolotl from the mold — revealing a stunning mix of shimmer, neon, and pearly white movement.
7. Finishing Touches
• Check for any rough edges and sand if needed. This piece shines beautifully under both natural and UV light!

Save with Eye Candy code: UNEQKREATIONS

#ResinArt #AxolotlResin #ElectricTide #ResinArtist #TReXInks #ResinGlow #EyeCandyPigments #ResinCreation #ResinCommunity #CraftResin #ResinDesigns #ResinInspiration #NeonResin #HandmadeResin