Inyector de Cera Automático WaxMax 4000 Plus - Español

Описание: Maxmatic WaxMax 4000 Plus

The Marriage of Performance and Elegance

INNOVATION -- CREATIVITY - TECHNOLOGY

THE NEW MAXMATIC WAX INJECTOR COMBINES THESE

3 QUALITIES with intelligent DESIGN

INNOVATION: MAXMATIC was the inventor of the data saving memorising the injection parameters

CREATIVITY : their elaborate designs illustrate the innovative capacity, creativity and technological excellence of MAXMATIC.

TECHNOLOGY: WAXMAX 4000allows you to navigate the clear and detailed menu for all settings with the use of a joystick. As a state of the art tool of manufacturing, the WAXMAX 4000 is designed for the continuous production of the highest quality waxes

2000 waxes / day per operator, with several workers on the machine with different moulds

ADVANTAGES

Very easy to place the moulds in position
Very easy and fast to change the clamp
Very easy and efficient to operate with a joystick no special training or experience
Clear and comprehensive display
Perfect repeatable waxes with identical weights

100 % SUCCESSFUL :

SAME RESULTS AS PROTOTYPING:
Bigger production capacity, faster, cheaper

CHARACTERISTICS

100 programs
Injection parameters memorised in a micro chip:
Each micro chip in each mould has its memory.
This memory can be modified or increased at anytime.
Reusable micro chip
wax pot under vacuum to avoid air bubbles
REGULATION OF THE ADVANCE CLAMP PRESSURE
FILTRATION OF THE WAX : no residus, no humidity
Electronic control of the wax level in the pot
Control of the fluidity of the wax
CONTROL OF THE DISTORTION OF THE MOULD, using automatic wedges to block the mould on both sides

MEMORY

type of wax
melting point of the wax
vacuum on or off (active or not)
position automatic or manual (with or without clamp)
tank temperature Degrees C (xx,x)
injector temperature Degrees C (xx,x)
tank pressure Bars (x,xx )
fluidity of the wax
advance clamp pressure Bars (x,xx)
clamp pressure Bars (x,xx)
time for the clamp to go Minutes, seconds, 10th/se
time under vacuum Minutes, seconds, 10th /se
injection time Minutes, seconds,10th/se
cooling time Minutes, seconds,10th/se

PARAMETERS OF EACH MOULD  (micro chip)

N°of the mould
Name of the mould
Date of the mould
Name of the owner
Weight of the wax...

All these settings are adjusted with a joystick
All these parameters can be red, recorded and modified

MAXMATIC
TEL : 33 (0)5.56.20.43.44 ou 33 (0)5.56.38.84.89
FAX : 33 (0)5.56.68.60.03.
EMAIL : [email protected]
WEBSITE : www.maxmatic.fr