3S 40A Li-Ion Lithium Battery Charger & Protection Board PCB BMS – Complete Guide & Setup!

Описание: Here’s a sample specification list for a 3S 40A Li-Ion Lithium Battery Charger with a Battery Management System (BMS):
BUY: https://s.click.aliexpress.com/e/_omz...

Specifications:
Battery Type: Li-Ion (Lithium-Ion) or LiPo (Lithium Polymer)
Battery Configuration: 3S (3 cells in series)
Input Voltage: Typically 12.6V (for 3S charging up to 4.2V per cell)
Output Voltage: 12.6V (fully charged)
Max Continuous Discharge Current: 40A
Max Continuous Charge Current: 20A (varies by model)
Overcharge Protection:
Overcharge Voltage: 4.25 ± 0.05V per cell
Release Voltage: 4.15 ± 0.05V per cell
Over-Discharge Protection:
Over-Discharge Voltage: 2.7 ± 0.1V per cell
Release Voltage: 3.0 ± 0.1V per cell
Short Circuit Protection: Yes, automatic recovery
Temperature Protection: Optional, varies by model
Balance Feature: Yes (to ensure equal voltage among cells)
PCB Size: Typically around 45mm x 60mm (may vary by manufacturer)
Additional Protection: Overcurrent and thermal protection in some models
This board is designed for safe charging, battery longevity, and protection against common lithium battery risks. Let me know if you need more specific details!

ＬＩＫＥ | ＣＯＭＭＥＮＴ | ＳＨＡＲＥ | ＳＵＢＳＣＲＩＢＥ
=== = = = = = = = == = = = == = = = == = =
== = = = = == = = = = = = = == = = = = = ==
★★ Please like and subscribe ★★
   / @yellowpurple  
=== = = = = = = = == = = = == = = = == = =

How to extend wifi range with another router wirelessly
   • How to extend wifi range with another rout...  
How To Program ATtiny85 Microcontroller with Arduino Uno || Programming And Burn Bootloader
   • How To Program ATtiny85 Microcontroller wi...  
TP-Link To Netgear Router Wireless Internet Sharing || Router As WiFi Repeater, Range Extender - WDS
   • TP-Link To Netgear Router Wireless Interne...  
view ip camera easy way
   • Видео  
How to extend wifi range with another router
   • How to Extend WiFi Range to Resolve a Weak...  
sokoban level 11 solution
   • sokoban level 11 solution  
Diy Arduino Based Ultrasonic Radar System || Using Ultrasonic Sensor & Servo Motor With Arduino
   • Diy Arduino Based Ultrasonic Radar System ...  
How To Connect wirelessly Two Routers On One Home Network Using WDS without cable
   • How To Connect wirelessly Two Routers On O...  
How to Make Water Overflow Alarm With Led Indicator Save Electricity & Water

★★=== = = = = = = = ==★★
Contact us for any enquiries :
[email protected]
www.facebook.com/rubel1628
★★=== = = = = = = = ==★★

#yellowpurple
#BatteryProtection #LiIonCharger
=== = = = = = = = == = = = == = = = == = =