How to Install a 2007-2010 Toyota Camry Hood

Описание: Learn how to do a Toyota Camry hood installation. It is SUPER EASY to do and all you need is one wrench and maybe a helping hand for this DIY Hood Replacement.

Where to Buy: http://bit.ly/revemoto_camryhood
Blog Available : https://www.revemoto.com/blogs/revemo...

0:00 Start
0:31 Tools needed
0:42 Install the hood
1:00 Insert the bolts to hold the hood in place
2:08 snap on the strut
2:17 Explanation of process
2:50 Check alignment or spacing
3:24 Tighten the hood bolts
4:06 Outro
4:33 Next Episode

This is the second part of our Camry hood replacement series. If you already have taken off your hood, you are going to basically just going to work in reverse.

For the hood install, all you will need is a 12mm socket and wrench. Make sure that you have not removed the hood brackets or loosened those bolts. As we mentioned in the first video, loosening or removing the hood brackets from the frame of the car will absolutely cause alignment issues.

If or when you do have alignment issues with your hood, the fix is easy. Here are some Camry hood aligning tips. Just adjust the side of the hood with the alignment problem by loosening the bolts on that side. By loosening the bolts, you have forward and backward movement to adjust the hood forward or back. That's it. Once the spacing is solved you have nothing else to worry about. Also, don't forget to re-attach your windshield washer's hose.

If your car was in a much bigger accident, spacing issues may be a big problem that only pulling your vehicle frame will fix. Good luck!

Source: https://www.revemoto.com

Follow Us on
FB:   / revemoto  
IG:   / revemoto  
Twitter: https://twitter.com/revemoto?lang=en

________________________________________________________
#ToyotaCamry #Toyota #paintedautoparts #CamryHood #highquality #DIY #HowTo #revemoto #DIYCarRepair #CamryDIY #HoodReplacement

DISCLAIMER: While ReveMoto tries to make the information in this video as accurate as possible, we make no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself (DIY) projects entail some risk. It is the sole responsibility of the viewer to assume this risk. ReveMoto is not responsible or liable for any loss, damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.