2010-2015 Toyota Prius Intake Manifold cleaning

Описание: This was for a 2012 Toyota Prius. You want to do this service every 100-120k miles due to oil and sludge getting trap in the intake manifold, and also preventative maintenance on the PCV valve. Its best to do this service so you can kill 2 birds with 1 stone. Enjoy!

P.S: Also make sure to clean the small ports on the intake manifold like everyone mentioned in the comment section. Also, people have been soaking the egr cooler in oven cleaner and it broke down all the carbon build up in there.

Tools:
https://amzn.to/4gxGF43 3/8 Ratchet
or
https://amzn.to/4gUlHN2 1/4 Ratchet
http://amzn.to/2aJy9kF 3/8 short extension set
http://amzn.to/2aYXnIy 3/8 10mm deep socket
http://amzn.to/2aZPqGv 10mm wrench
http://amzn.to/2aCThW4 3/8 12mm socket
http://amzn.to/2axt8Zh 1/4 1,3,6" extension set
http://amzn.to/2btKbQd 1/4 10mm deep socket
http://amzn.to/2aweq4t Pliers
http://amzn.to/2b5u8I2 Hose clamp tool
http://amzn.to/2aETaN5 Hook and Pick Set (to get those plastic clips)
Drills
Brushes, plastic and brass

Parts:
http://amzn.to/2b5169E Brake clean
Intake manifold gasket

Torque specs:
21 ft. lbs - Intake Manifold bolts and nuts
62 in. lbs - MAP sensor
7 ft. lbs - EGR pipe bolts
15 ft. lbs - Oil dipstick guide sub-assembly bolts
7 ft. lbs - Throttle body bolts
Hand tight

like and share this video!

If you have any questions or concerns, feel free to leave comments on our FB page.

Like us on Facebook
http://bit.ly/nutzaboutbolts1

and SUBSCRIBE!
http://bit.ly/NutzAboutBolts2