Gateron Box Ink Review: New & Improved!

Описание: Gateron Ink V2s just got an upgrade.

↓ Links, Build Details, & Notes ↓
Box Inks: https://elboard.store/collections/swi...
Use code "techbro" at checkout to save 5%!

Disclaimer: The link and discount code both give me a small commission!

Follow/sub to Doakyz!
  / doakyz  

Yellow Ink stem picture credit: https://www.keebtalk.com/u/Deadeye

Build Details

Maker Scarlet
R1 e-black aluminum case
60A o-ring mount
Full aluminum plate
Stupidfish Plate Foam

Gateron Pink Box Ink Switches
Stock 60g slow springs
100g SPRiT Progressive on spacebar
Krytox 205g0 (bottom rails, top all sides, stem all sides + legs)
0.3mm Deskeys gasket films

Stabilizers
Durock screw-in V2
Epsi mod w/ KBDfans stab pads
Krytox 205g0 on housings
XHT-BDZ on wires

Keycaps
ePBT x Gok BoW (~1.5mm thick PBT)
IFK WoB Accents (~1.5mm thick PBT)

Recording Gear
Sony ZV-1
Rode NT-1
SM6 shock mount + pop filter on PSA1 mic arm
Wave XLR

Sound Adjustments
12 o'clock on my Wave XLR + 6db increase in post
High-pass filter to reduce desk reverberations

Notes
Fun fact: the Gateron logo on the top housings is "flipped" on the Pink Box Inks but "normal" on the Black Box Inks. I think this is likely due to Gateron using Ink V2 molds for the Black Box Ink housings. It doesn't seem to affect performance or sound, but it's mildly interesting to note. This can also be seen in the Cap V2 switches, where the Cap Browns have the flipped logo, but the Cap Yellows still have the standard orientation.
10/10 would recommend using an Ink or any long pole linear instead of U4Ts on spacebar

Affiliates
Discount code "techbro" for 5% off in-stock items (applies to all affiliate vendors)!
Divinikey: https://divinikey.com/techbro
ELBoard: https://elboard.store?sca_ref=936807....
KeebsForAll: https://keebsforall.com?sca_ref=11456...
PovertyKeys: https://povertykeys.com/

Contact Info
Email: [email protected]
Twitter:   / brudderyt  
Discord: Miguel 7034

#technologybrother #boxinks #blackinks #gateron