Designing a High-Altitude Two Stage Model Rocket

Описание: Join The Rocket N00b for a hands-on, live tutorial on designing an extreme altitude two-stage model rocket from scratch! Using the free, open-source OpenRocket design software, I'll guide you through the rocket design process step by step. Whether you're a beginner or an experienced hobbyist, this DIY rocket design session will help you build and launch your own high-altitude rocket.

Download OpenRocket here: https://openrocket.info/

How a 2-stage model rocket works: https://www.apogeerockets.com/Tech/Ho...

To further your understanding of model rocketry and high power rocketry, check out these must-read books (affiliate links):

The Handbook of Model Rocketry - https://amzn.to/35XRbCY
Make: Rockets: Down-to-Earth Rocket Science - https://amzn.to/3JkOB7z

Equipment used in this live stream:
Audio Interface by Behringer: https://amzn.to/3X5wAnZ
Microphone - Rode Podmic: https://amzn.to/3X7kqe5
Alternative Audio Interface: https://amzn.to/3WOKJV5

Ozeri Pronto digital kitchen scale: https://amzn.to/3z2pgAb
AWS Digital Pocket Scale: https://amzn.to/3Mvwuje

By purchasing through these links, you'll support the channel at no extra cost to you!

Here's that BPS video I was talking about:    • The rocket motor that broke me - Simplex V2  

For more information and to get involved in the model rocketry community, visit the National Association of Rocketry: https://www.nar.org/

Like and subscribe to The Rocket N00b for more content on building and flying model rockets and high power rockets!

Chapters:
0:00 Intro
0:56 Parameters
2:30 OpenRocket
4:54 Parts
14:35 Using a Scale
16:49 The Nose Cone
19:06 The Payload Section
25:00 Oops! Going Back to the Simulation
27:00 Altimeters and Static Ports
28:46 Body Tube and Motor Mount
34:33 Putting Fins On
40:22 Choosing the Altimeter Payload
43:44 The Recovery System and Launch Lug
49:47 Streamlining the Fins
54:32 Motor Retention with Tape
59:10 Flight Simulation for the Second Stage
1:03:15 How Model Rocket Motors Work/Multi Staging
1:14:20 Making the Booster Stage
1:20:30 How High Will Our Rocket Go?
1:21:46 Naming the Rocket
1:23:00 Printing the Parts List

#HighAltitudeRocketry #RocketDesign #OpenRocket #DIYRocketry #STEMProjects #RocketScience #ModelRocketryForBeginners #AmateurRocketry #RocketryEducation #RocketrySimulation #ScienceFairIdeas