How to replace a PVC door panel

Описание: To order direct from Windoor, please visit our online store - http://windoorservices.net/?route=pro...

A video to show how to remove and replace a PVC door panel.

The steps go as followed;

1) First remove the beading that holds the glass or uPVC panel in place. The beading can be removed by pushing a stuff putty knife or similar into the beads leading edge and gently easing the bead out (We recommend removing the longer beads first, and also maybe mark the beads left, right and so on because they can vary in size).

2) With the beading removed, gently remove the panel.

3) Measure the overall thickness of the panel; this will either be 20mm, 24mm or 28mm.

4) Measure the overall width and height of the panel.

5) Now to order the panel, this can be done by searching Windoor on eBay or Amazon and choosing the size required (in terms of the thickness, width and height of panel. Also we supply panel at 750mm square, but we cut to size for free).

6) Before fitting, remember to remove the protective film on both sides of the panel.

7) The panel can now be slotted into the door (remember to place packers in the bottom of the hole where the panel is going, as seen in the video). The beading is the final part, and is needed to be clipped into place, and tapped in using a soft glazing hammer and we recommend fitting the shorter beads in before the long ones).

if any more assistance is needed, ring us here at Windoor Services on; 01656 745050.

The song used is:- Herb Alpert & the Tijuana Brass - Spanish Flea