ycliper

Популярное

Музыка Кино и Анимация Автомобили Животные Спорт Путешествия Игры Юмор

Интересные видео

2025 Сериалы Трейлеры Новости Как сделать Видеоуроки Diy своими руками

Топ запросов

смотреть а4 schoolboy runaway турецкий сериал смотреть мультфильмы эдисон
Скачать

How to Build a Berm and Retaining Wall for Your Landscape - The Great Outdoors

Your New House

yournewhouse

Michael Holigan

Home improvement

remodeling

home builder

home building

homebuilding

home buying

YNH

Joe Sherinski

landscaping

gardening

the great outdoors

planting

gardening tools

how to build a berm

how to build a retaining wall

hot to dry stack

how to make a dry stack wall

improving soil

creating a better soil for planting

controlling drainage

improving drainage

raise bed

planting flowers

Автор: Your New House

Загружено: 2020-04-26

Просмотров: 41382

Описание: A berm is a mound of earth frequently supported by a dry stacked wall, or a wall built without mortar. A berm can be built over hard soil, back filled, and landscaped with plants requiring good soil.

Tools needed:

Spade
Level
Chisel
Heavyweight Hammer
Protective Glasses
Gloves
2” x 12” x 18” piece of wood
Piece of old carpet


Materials needed:

Sections of rectangular cut sandstone (# will depend on the distance of edging required. Be sure to measure before purchasing stone).
Several bags of builder’s sand.
Drought tolerant plants (Sedums, Hens and Chicks, etc.)
Good top soil (for back fill)


Steps for building a berm

1) Dig a trench several inches deep for the for the first (bottom) row of stones. Use the thickest stones for your first row. Fill the bottom of the trench with builder’s sand. Lay the first stone in, being sure it is level both ways. Move the stone back and forth in the sand to help level the stone.

2) Lay in the second stone. If the end of the stones do not fit together, you may have to cut the stone.


Instructions for cutting sandstone

Use a level to mark a line on the second stone, which is parallel to the end of the first stone.
Place the stone to be cut on a 2” x 12” x 18” board, covered with an old piece of carpet. This will provide a surface for the weight of the rock, to be evenly distributed.
Next, place the chisel on the mark. Using the weight of the hammer, tap the complete length of the mark several times. This will create a fault line for the rock to break. Do not hammer the stone with force- this will cause an uneven cut.



3) Repeat step 2 until your first row of stones is complete.

4) Next simply build up the wall, using your first row as your foundation. Every row should be made with stones of the same thickness. Every row should also recede slightly. (That is, the verical face of each stone is set back 1/2” or more from the one beneath it; so that the wall will not be vertical, but stairstepped back into the slope.)

5) Plant the drought resistant plants between stones as you build your wall. This will ad a look of longevity to your new wall.

6) When your wall is complete, backfill it with good soil and plant your landscape.

Не удается загрузить Youtube-плеер. Проверьте блокировку Youtube в вашей сети.
Повторяем попытку...
How to Build a Berm and Retaining Wall for Your Landscape - The Great Outdoors

Поделиться в:

Доступные форматы для скачивания:

Скачать видео

  • Информация по загрузке:

Скачать аудио

Похожие видео

© 2025 ycliper. Все права защищены.



  • Контакты
  • О нас
  • Политика конфиденциальности



Контакты для правообладателей: [email protected]