ARCADE 1UP MOD: How To Install 17/19" LCD Panel From Monitor To Run On A1UP Gen 1/2 PCB - PART 2

Описание: ***************************************************************************
NOTE: ANY MODIFCATIONS ARE DONE AT YOUR OWN RISK. I CANNOT BE RESPONSIBLE FOR ANY DAMAGE DONE WITH MODIFICATION.
***************************************************************************

******************************************************************************
NOTE: YOU ONLY NEED TO VIEW THIS PART OF THE SERIES IF YOU ARE DOING AT 19" LCD PANEL MOD. IF YOU ARE ONLY DOING A 17" LCD PANEL MOD, PROCEED TO PART 3 OF THE VIDEO SERIES
******************************************************************************
This is Part 2 of the 3 Part video series on how to Install 17/19" LCD Panel From Monitor To Run On A1UP Gen 1/2 PCB.

This video is a continuation of Step 4 from Part 1 of the video series. The video shows how to finish preparing the parts if you are going to upgrade to a 19" LCD Panel. If you are doing at 17" LCD Panel, you DO NOT need to view this part of the series and can proceed to Part 3:

Video is broken down in time indexes so you can go to part of video you need to:

Introduction: 0:00
Part 2 Details: 1:03
Step 4G - Additional Cuts to Wood Strips: 2:04
Step 4H - Drill Screw Holes For New Bezel Plexiglass : 7:51
Step 4I - Cut Posterboard For Bezel Border: 13:56
Step 4J - Measure and Cut Outline On A1up Bezel For 19" LCD Panel: 29:29
Step 4K - Make Sure 19" LCD Panel Fits In New Cut Bezel: 43:37
Part 2 Conclusion: 47:37

Link to Part 3 of series is below:
   • ARCADE 1UP MOD: How To Install 17/19"  LCD...  

Link to Part 1 of series is below:
   • ARCADE 1UP MOD: How To Install 17/19"  LCD...