Aqua-6 Ozone Generator Fuse Change
Автор: A2Z Ozone Inc.
Загружено: 2018-08-03
Просмотров: 1379
Описание:
Follow this walkthrough from our technician to change the fuse in the Aqua-6 Ozone Generator.
Make sure the unit is off and unplugged
Remove screws from the back of the unit
The fuse is located under a small black plastic piece
You will need to apply some pressure to open the area where the fuse is located
Remove the fuse
You may need to pull slightly
Place the new fuse where the old one was
Press down until you hear it click into place
Close the compartment where the fuse is stored
When you hear it click, you will know it is secured
Close the back of the unit and put screws back in place
Make sure to put black feet onto the back of the unit
This helps keep the unit from rattling when it is on flat surfaces
The fuse has now been successfully changed.
For troubleshooting assistance, contact our office or send an email to [email protected] for help from the Head Technician.
View the blog post here: https://www.a2zozone.com/blogs/how-to...
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
