Dynamite 1/8 Scale RC Car Starter Box - Battery Tray Modification

Описание: The Dynamite DYNE4400 starter box recommends different batteries than what I used. I wanted to use some batteries that I found on Amazon, and assumed that they would fit because 2 of the three recommended batteries for the bump box are the rectangular LiPo style. Maybe I was missing something in the instructions. The mounting plates they sent were to short for mounting the LiPos, even though the LiPos I ordered were the same dimensions as the recommended batteries. WTF

Batteries that are recommended are below
(2) - DYN1060EC Speedpack® 7.2v 2400mAh NiMH 6C Flat: EC3
(2) - DYN9001EC Reaction® 7.4v 4000mAh 2S 20C LiPo Hardcase: EC3
(1) - DYN9006EC Reaction® 11.1v 5000mAh 3S 20C LiPo Hardcase: EC3

The batteries I used
(2) - Zeee 7.4V Lipo Battery 2S 50C 5200mAh Lipos Hard Case with Dean-Style T Connector

The bottom two are the rectangular type like I bought, but for some reason I could not get them to work. They just were not going to mount up.
I decided to just put a floor in the box and velcro the batteries in. I am actually happier with this setup even though it took a bit more time.

I hope this helps any of you that are having the same issues.