Nintendo Switch Charger Port Replacement | Repair Tutorial
Автор: Joe's Gaming & Electronics
Загружено: 2021-07-07
Просмотров: 9253
Описание:
Are you a repair ninja 🥷 ? Buy the parts here 👉 https://bit.ly/3ywBU4x
Purchase Tools Here 🧰 https://bit.ly/2VjnjLB
Written Repair Guide 👉
Send your device in for repair 👉 http://bit.ly/2wwrMdQ
Steps to fix your device.
1. Unscrew the 4 screws on the back of the Nintendo Switch
2. Unscrew the screw under the stand
3. Unscrew the two screws on the bottom of the Switch
4. Unscrew the screw in the middle on both sides where the joycons would be
5. Pull out the SD cover
6. Remove the back cover
7. Remove the screws holding the backplate
8. Unplug the battery
9. Remove the heat sync
10. Unscrew the main board
10. Unplug all the ribbons connected to the main board
11. Put the mainboard into a vice
12. Heat up the solder points around the charger port
13. Use the machine to suck out the solder from the main points
14. Use a heat gun to heat up the small; points
15. Remove the old charger port
16. Prepare the new charger port
17. Install the new charger port
18. Put the unit back together
19. Get back to gaming 🎮
Follow us on our social media for more repair content:
Instagram 📸 - / joesge
Facebook - / joesge
Feel free to reach out to our support team with any questions your brain has developed during the watching or pre-gaming of this video:
www.JoesGE.com 📲
[email protected] 📩
360.362.1722 📞 (Text or Call)
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке: