How to Replace Rear Wheel Hub & Bearing 2001-2007 Volvo V70

Описание: Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com https://trq.video/ia-1ASHR00215
New Wheel Bearing & Hub Assembly Set from 1AAuto.com https://trq.video/ia-1ASHS00708

This video shows you how to install a rear wheel hub and bearing on your 2001-2007 Volvo V70. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.

This repair was done on a 2001 Volvo V70 X/C 2.4L Wagon 4-Door AWD Automatic and the process should be similar on the following vehicles:
2001 Volvo V70
2002 Volvo V70
2003 Volvo V70
2004 Volvo V70
2005 Volvo V70
2006 Volvo V70
2007 Volvo V70

Tools you will need:
• Flat Blade Screwdriver https://trq.video/of7-1AXAA00013
• Pocket Screwdriver
• 17mm Wrench https://trq.video/obu-1AXAA00010
• 10mm Socket https://trq.video/oe7-1AXAA00017
• 13mm Socket https://trq.video/ofQ-1AXAA00015
• 14mm Socket https://trq.video/ofQ-1AXAA00015
• 17mm Socket https://trq.video/ofQ-1AXAA00015
• 19mm Socket
• Air Compressor
• Torque Angle Gauge
• 1/2 Inch Impact Gun https://trq.video/oX-1AXAA00252
• Air Chisel
• 3/8 Inch Drive Ratchet https://trq.video/ofQ-1AXAA00015
• Ratchet https://trq.video/ogw-1AXAA00016
• Swivel
• Torque Wrench https://trq.video/odA-1AXAA00044
• Drill
• Brake Parts Cleaner
• Cloth Rags https://trq.video/oas-1AXSS00035
• Copper Anti-Seize
• Liquid Thread Locker
• Silicone Paste
• 7mm Allen Wrench
• Drain Pan
• Rubber Mallet
• Sledge Hammer
• Wire Brush https://trq.video/o9-1AXAA00079

Subscribe:    / @trq  

Check out our playlist:
Volvo V70 2001–2007 2nd Generation:    • Volvo V70 2001–2007 2nd Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.