How to Use Switch Bit Hex Adapters | Eagle Tool US Series: Part 4 | 1/4" and 3/16" Bit Adapters
Автор: DIY for Home and Life
Загружено: 2025-03-03
Просмотров: 1187
Описание:
*Eagle Tool US 54" Drill Bit Extension BAG ONLY - ReviewQuickly change between necessary bits and extensions to make your job go so much faster. It’s literally as easy as slipping on and off and tightening a few screws. You can add shanks, quick bits, or cable bits directly to the adapter. Its super easy to do, it comes with a hex key but obviously you can use any hex key, just loosen the set screws and slide in your bit or extension of choice before tightening the screw.
Their design allows you to use it on any standard 3 flat shank like this one here for my dirt auger, or EAGLE TOOL’s US new XFLEX shank that has a designated notch to keep your bit from slipping. They like to say Skip the Slip! And I can attest that statement is legitimate. Simply put, the screws slide into this small notch at the bottom of the shank, which is then tightened with set screws, giving you extra holding power so your bit doesn’t slip or even worse- slips off in the wall.
Materials Used:
1/4" Switch Bit Hex Adapter - https://amzn.to/4blDdbn
3/16" Switch Bit Hex Adapter - https://amzn.to/41m46r4
Eagle Tool US Review and Demo Videos:
How to Run Wire Through Existing Walls - • How to Run Wires or Cables Through Walls U...
Lighted Bull Nose Tip - • How to Use Lighted Bull Nose Tip for Fiber...
Switch Bit Hex Adapters - • How to Use Switch Bit Hex Adapters | Eagle...
Fiberglass Fish Sticks - • Tool for Fishing Wires BACK Through Walls ...
Eagle Tool US 54" Drill Bit Extension BAG ONLY - Review - • Eagle Tool US 54" Drill Bit Extension BAG ...
1/4-inch Cable and Installer Bit Extension Shanks - • 1/4-inch Drill Bit and Installer Bit Exten...
FIsh Rod and Noodle Kit with Ball and Chain Magnet - • Game-Changer for Wire Pulling? 🧰 Eagle Too...
Allen Wrench and Set Screw Kit - • Allen Wrench & Set Screw Kit from Eagle To...
Products Used in Series:
54" Flex Shank Drill Bit - https://amzn.to/4ka5TrA
54" Flex Shank Drill Bit with 36" Extension - https://amzn.to/436EvVq
16' Fiberglass Rod Extension Kit- https://amzn.to/3D70FMF
Lighted Bull Nose Tip For Fiberglass Fish Rods - https://amzn.to/4gZvrVE
Quick Switch Hex Adapter and Installer Drill Bit Extension Kit - https://amzn.to/4gT06Uw
Fiberglass Rod Kit (with accessories) - https://amzn.to/4bozoC3
Wire and Cable Fiberglass Rod Kit (8 ft) - https://amzn.to/3XjhQBw
Wire and Cable Fiberglass Rod Kit (12 ft) - https://amzn.to/3ERYv40
Wire and Cable Fiberglass Rod Kit (16 ft) - https://amzn.to/4gVTRPW
1/4" Switch Bit Hex Adapter - https://amzn.to/4blDdbn
3/16" Switch Bit Hex Adapter - https://amzn.to/41m46r4
Eagle Installer Drill Bit Bag Only, 54-Inch - https://amzn.to/3FrPcYW
16 Ft Installers Fiberglass Rod Kit with LED Light Tip, and Noodle - https://amzn.to/3DSBfTm
Allen Wrench and Set Screw Kit https://amzn.to/424gDzy
Visit My Amazon Storefront: https://rb.gy/1kw6fn
Subscribe to the DIY Realtor: / @diyforhomelife
About this item
-Adapt any 3/16-inch shank cable installer bit or switch bit to a 1/4-inch quick change hex
-Compatible shanks: ET18715, ET18721, ET18733, ET18751, and ET18769
-Made in the USA
-Compatible Switch Bit heads: ETS375, ETS562, ETH375, and ETM375
-Compatible with Allen wrench and spare set screw kit ETAKIT1
#hex #eagletoolus #cablebits #bits #adapters #diy
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке: