Outdoor Wood Furnace: How I Installed Radiators and Plumbed My House
Автор: Daniel Whitlow
Загружено: 2020-09-04
Просмотров: 35007
Описание:
In this video I show how I installed the indoor components for my wood burner system. One thing I forgot to mention is after everything is installed you should run a heat load check to make sure your pump is running fast enough. It's simple to do. Turn on a hot water faucet and have all of your furnaces running. Check the temperature going into and out of each location. If the water from the wood burner is cold by the time it gets to a furnace or even coming out of it, I suggest increasing your pump speed. Enjoy! Post any questions if you have any!
**Update 2021: I removed the Sharkbite fittings since they developed leaks at both furnaces (the thermal cycles are suspect whether it was due to thermal expansion/contraction or on the joint/seal integrity). This time I went with sweat fittings and made sure the way it was plumbed it still had the ability to flex/contract.
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
