Dimplex - how to raise and lower the heat curve

Описание: A basic demonstration on how to raise or lower the heat curve on your Dimplex WPM heat pump control. This does not apply to A-Class and LA-Mi units.
Heating curves (lowering and raising) On commissioning, the heating curve is adapted in accordance with local conditions and the building structure. These heating characteristics can be adjusted to individual temperature re-quirements by means of the warmer/colder control on the main screen. Use the ⇑ key to raise the temperature: the slide bar displayed in the bottom line advances to the right. Use the ⇓ key to lower the temperature: the slide bar displayed in the bottom line advances to the left. Remember increased temperatures will usually result in a slight increase of running costs.


•Press enter and the cursor will move to the lower part of the screen.

•Use the up arrow to increase the heating flow temperature or the down arrow to lower the heating flow temperature.

•Then press enter once selected.


#dimplex #heatpump #heatingsystem


*Adjusting the system without fully understanding it may cause adverse effects such as increased running costs or damage to the system. If in doubt always refer to the user manual or seek expert advise.