Kryton India - Concrete Waterproofing Solutions

Описание: Kryton is the inventor of the original crystalline admixture and have been in the Indian (subcontinent) market longer than any other manufacturer. Kryton-India uniquely prides itself in giving waterproofing solutions dedicated to India and Indian subcontinent construction methodologies. Kryton’s experience is second to none as it’s based on real world application and specification needs.

website - www.kryton.in

Head Office
136-137, Centrum Plaza,
Golf Course Road,
Sec 53, Gurgaon, Haryana 122002
Tel: +91 1244381140/41
+91 9873477886
Email: [email protected]





OUR PRODUCTS LIST-

Krystol Internal Membrane™ (KIM®)
Krystol Internal Membrane or KIM is an integral crystalline concrete waterproofing admixture; and a PRAH (Permeability Reducing Admixture – Hydrostatic Conditions). When combined with water, KIM’s proprietary chemicals react to form millions of needle-like crystals. These crystals grow and fill the capillary pores and micro-cracks in the concrete, blocking the flow of water. As time passes and stresses form new cracks, any incoming moisture causes the crystals to reactivate – ensuring continuous waterproofing over the years.

Hard-Cem®
Hard-Cem is an Integral Hardening Admixture used to increase Abrasion and Erosion resistance of concrete.

Krystol Mortar Admixture™ (KMA)
Krystol Mortar Admixture (KMA) reduces both permeability and absorption and lowers up front building costs compared to surface applied sealers. It is easy to apply and saves costs with reduction in rebound loss and surface preparation. Ideal for use in mortar for cladding, tiles etc.

Krystol Plug™
Krystol Plug is a powder that when mixed with water, can be used to immediately stop water flow through concrete cracks. It is easy to mix and apply and has exceptional strength. Just like all the products by Kryton Plug is safe to use with potable water

Krystol T1®
Krystol T1 is a surface applied system that can be used as a single coat or as part of a double coating system. It can be applied with brush or spray and is also used as dry shake on new or existing concrete.
Krystol T1 is effective on the positive side as a single coating and the negative side in combination with T2. It seeps into the concrete through micro-cracks making the entire concrete a waterproof barrier.

Krystol T2®
Krystol T2 is a surface applied system. It can be applied with brush or can be sprayed on new or existing concrete. Effective on the positive side as a single coat and on the negative side as a double coating system along with Krystol T1, it seeps into the concrete and works from within.

Krystol Waterstop Grout™
Krystol Waterstop Grout is a crystalline grout used to create an internal or external waterstop at construction joints, pipe penetrations, tie-holes and control joints.

Krytonite™ Swelling Waterstop
Krytonite Swelling Waterstop is a synthetic rubber waterstop that uses swelling pressure to seal concrete construction joints and stop water. Krytonite has superior swelling pressure and performance that stops water better than bentonite and competing swelling waterstops.

Krystol Bari-Cote™
Krystol Bari-Cote is a fast-setting waterproof grout. Specified for use in construction joint Krystol Bari-Cote is used to repair holes and cracks in combination with T1. It has high early strength, super bonding ability and can withstand high hydrostatic pressure.

Krystol Broadcast™
Krystol Broadcast is a dry shake crystalline waterproofing treatment that transforms new flatwork concrete into a permanent waterproofing barrier.

Roof-Gardi™
Roof-Gardi is a thermosetting plastic elastomer, synthetic based waterproof membrane. Because of its excellent flexibility and thixotropic nature it is ideal for use on vertical as well as horizontal surfaces. An economical, easy to apply and pollution free water proof coating works best on terraces, terrace gardens podiums etc. This coating is provided in base white and can be pigmented to desired colour.

Roof-Gardi (P)
Roof-Gardi (P) is a water based, single component, high performance Polyurethane based cold applied thixotropic
waterproof coating. It provides excellent resistance to moisture, water and salt penetration in concrete and masonry
surfaces. Roof-Gardi (P) confirms to ASTM C836 and C898.