GameCube No Video Repair! GameCube AV Wiring Schematic + Comprehensive Troubleshooting + Disassembly

Описание: This video will show you how to troubleshoot your GameCube with NO video and audio! This video will show you how to repair a Gamecube that is not working! A lengthy video but packed with useful information/guide! I value your time so I fast-forwarded where I can! I scrubbed it so you do not need to fast-forward! This video includes detailed - step by step disassembly of the GameCube console! Plus, How to troubleshoot your AV Cable. In this video, I showed how I opened the AV cable and re-bent the contact points for a stronger AV connection. I also showed how to do a continuity test on the GameCube's AV cable for video and audio!
This video will show you the wiring schematic of the video output of the GameCube console. Looking from the rear of the GameCube console, top left, starting from the left, the 2nd contact point is the video connection. That is PIN #9. I included a wiring schematic for Gamecube on this video to help you out! I also bypassed the video out of the GameCube console and soldered a yellow video output wire directly on Pin #9.

I also cleaned the entire motherboard with a Mass Air Flow Sensor cleaner! I did the same thing for my SNES console aka Super Nintendo and my Nintendo 64 (both now fixed)! Links to them will be added to the cards and end of video! Use CRC Electronic cleaner if you do not have a mass airflow sensor cleaner.
I also showed on this video How to desolder the Gamecube battery and replaced it with a new CR2032 battery!
All of the troubleshooting video clips start 6:27 after I replaced the motherboard! Detailed disassembly starts 12:30 | Motherboard cleaning starts 15:46 | Motherboard replacement starts 1:45 | Gamecube av schematic 6:48
Go through the basic troubleshooting first! Apply those no-cost fixes first and perhaps, you can fix your Gamecube! I ultimately repaired my Gamecube by replacing the motherboard! I got the mother board from Ebay for $20.00 | Good luck with your project and I really wish this video helps you out on getting your Gamecube running again! Thank you for watching and click subscribe!

Parts used on this video:
3.8 and 4.5 Nintendo ScrewDriver Tips ONLY https://amzn.to/3aYpciV
I bought this set that includes batteries for my other Nintendo Consoles: https://amzn.to/3aZAALk
Small Can of CRC Electronic Cleaner Quick Dry: https://amzn.to/3bYncIO
If you wish to use a mass airflow sensor cleaner | What I used on this video: https://amzn.to/2WmNjCH
AV to HDMI or RCA to HDMI https://amzn.to/2Ys1DfG

This is NOT a sponsored video. All products featured in this video were purchased with my own money. Help us fund our channel’s next video by using the AMZN links above. Price is the same whether you use the link or not. As an Amazon Affiliate, we earn a few cents here and there to help fund our next video project. I am an Amazon Affiliate.