How to Replace Upstream Oxygen Sensor 2009-2014 Honda Fit

Описание: Buy Now!
New O2 Oxygen Sensor from 1AAuto.com https://trq.video/ia-1AEOS00298

This video shows you how to install a new TRQ upstream oxygen sensor on your 2009-2014 Honda Fit. The Oxygen (O2) sensors help monitor the emissions system in your vehicle. They measure the amount of oxygen passing through the exhaust, which informs the computer about proper fuel/air mixture, and the condition of the catalytic converter. Over time, the sensors may fail due to contamination, or reaching the end of their service life. TRQ offers new O2 sensors made to manufacturer’s specifications.

This repair was done on a 2010 Honda Fit Sport 1.5L Hatchback 4-Door FWD Manual and the process should be similar on the following vehicles:
2009 Honda Fit
2010 Honda Fit
2011 Honda Fit
2012 Honda Fit
2013 Honda Fit
2014 Honda Fit

Tools you will need:
• 10mm Socket https://trq.video/odD-1AXAA00017
• 14mm Socket https://trq.video/od9-1AXAA00015
• O2 Sensor Socket
• Ratchet https://trq.video/oeN-1AXAA00016

Subscribe:    / @trq  

Check out our playlist:
Honda Fit 2009-2014 2nd Generation:    • Honda Fit 2009-2014 2nd Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.