GScreations Premium Designed Molded Smoked Tail Light Covers (Blackouts) for the 2020+ C8 Corvette

Описание: Get yours here https://www.gscreations.com/2020-c8-c...
.
.
.
Shot on location at https://www.redline-motorsports.net
Video created by https://www.Bonomotion.com

How they install: As you will see its very simple. Why fuss and fumble with a multi-piece cover kit that will take you forever to install! Since ours is only 4 pieces total it will take you under 2 minutes. Each tail light cover will come with pre-installed clear 3m tape. You simply clean your lights with the supplied alcohol, and let dry. Once dry remove the red tape backing and press on firmly for a few seconds. That's it! You do not need to remove your rear bumper to install these covers.

What you get: This is a 4 piece kit. One driver and passenger side tail light covers in a polycarbonate lexan transparent smoked blackout look. We also include the side tail light reflector overlays in a 12 mils thick adhesive-backed lamin-x film.

What they fit: 2020, 2021+ C8 Corvette All trim levels with factory C8 Corvette tail lights.

Material: Our taillight covers are molded from 1/8'' thick Polycarbonate lexan. (Polycarbonate aka lexan, is a tough and durable plastic material which is virtually unbreakable with 250 times the impact strength of glass and 30 times that of acrylic.) What does this mean to you...they will not break when installing, removing or heck even if you drop them unlike their predecessor C7 blackouts which were made from acrylic. The smoked color is built into the lexan so no worries about paint fade, peeling or chipping over the years.



These covers by design do not create an air or water tight seal. They were designed with water channels to allow water to flow through them. This simply means hassle free maintenance, if you see any dirt or grim between the factory light and the new cover simply spray water along the top or side edge to wash it away.



When another cars headlights shine at your tail lights all 3 reflectors (per light) still will reflect, also when you use your Parking/ Brake/ Turn signal/ Reverse lights they are still highly visible. We have been using this level of smoke on all of our lights since the C5 Corvette!