How to Replace Starter 2007-2010 Chrysler Sebring

Описание: Buy Now!
New Starter from 1AAuto.com https://trq.video/ia-1AEST00508

This video shows you how to install a new starter on your 2007-2010 Chrysler Sebring. The starter is a powerful electric motor that gets your engine to turn over when you turn the key in the ignition switch. If a motor has worn out or become damaged, your vehicle won’t start.

This repair was done on a 2010 Chrysler Sebring Touring 2.4L Sedan 4-Door FWD and the process should be similar on the following vehicles:
2007 Chrysler Sebring
2008 Chrysler Sebring
2009 Chrysler Sebring
2010 Chrysler Sebring

Tools you will need:
• Flat Blade Screwdriver https://trq.video/oe3-1AXAA00013
• 13mm Wrench https://trq.video/oa2-1AXAA00010
• 15mm Wrench https://trq.video/oa2-1AXAA00010
• 13mm Socket https://trq.video/oeE-1AXAA00015
• 15mm Socket https://trq.video/oeE-1AXAA00015
• Ratchet https://trq.video/ofj-1AXAA00016
• Socket Extensions https://trq.video/oeE-1AXAA00015
• Torque Wrench https://trq.video/ocG-1AXAA00044
• Magnet - Extendable
• Razor Blade / Gasket Scraper

Subscribe:    / @trq  

Check out our playlist:
Chrysler Sebring 2007-2010 3rd Generation:    • Chrysler Sebring 2007-2010 3rd Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.