etrailer | Valterra Waste Valve Body w/ Flexible Cable for RV Black Water Tank Review

Описание: Click for more info and reviews of this Valterra RV Waste Valves:
https://www.etrailer.com/RV-Waste-Val...
Check out some similar RV Waste Valves options:
https://www.etrailer.com/dept-pg-RV_W...

https://www.etrailer.com
Don’t forget to subscribe!
   / etrailertv  

Full transcript: https://www.etrailer.com/tv-Demo-Valt...
Today we're going to take a look at the Valtera waste valve body with the 72" long flexible cable extension for your RV black water tank.This is a replacement valve for your RV's black water tank. This will convert your hard to access valve handle to a nice simple push pull placement. The 3" diameter passage right here allows your waste water to travel freely when the valve is open. You can see that'll open the well and that'll close it. Your cable will attach right here to be able to open that valve.The 72" long flexible cable, this is what'll let you install your valve handle where you want it. Cable allows the valve to be placed in a nice secure location, or very easy to reach place.

This cable can be cut down to fit your application. The inner wire on this is constructed of stainless steel.This part will include everything laid out here on the table. The valve body itself, the flexible cable, the cable mounting bracket, the two seals, the nuts and bolts are all included to install it.Basically, to install this, you'll remove the broken waste valve on your RV and then what you'll do. And remove the old seals also. Then you'll take this and place the new valve body in place of that.

Include the new seals. One on each side just like that on the flange fittings. Then position your valve body where it needs be.Then once you get it all installed, and your handle where you want it, use all the hardware and tighten all the hardware down to complete your installation.But that should do it for the review on the Valtera waste valve body with the 72" flexible cable extension for your RV black water tank.