Stitcher Head Staple Leg Length
Автор: David Double
Загружено: 2018-04-07
Просмотров: 6488
Описание:
If the staple is off-center, meaning one leg is longer than the other, the length of the left leg has to be changed. Loosen, do not remove, the Wire Guide Spring Bracket Screw and the Wire Guide Adjustment Binder Screw. Using a screwdriver, turn the Wire Guide Spring Bracket Screw clockwise if a shorter left leg is necessary
and counter-clockwise if a longer left leg is necessary. A slight turn of the Adjusting will usually prove sufficient to achieve the desired length. A quarter turn of the Adjusting Screw will make a
considerable difference in the length of the staple’s leg. Once the desired length has been achieved, tighten the Binder Screw and the Wire Guide Spring Bracket Screw. At this point, the left leg should be approximately one half the width of the crown.
NOTE: If the staple leg has been lengthened, meaning the Wire Guide Spring Bracket Screw has been turned counter-clockwise, tap down on the Wire Guide Spring Bracket before tightening the Wire Guide Spring Bracket Screw.
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
