How to Replace Front Lower Control Arms w/ Ball Joint 2009-2014 Nissan Maxima

Описание: Buy Now!
New Control Arm with Ball Joint Set from 1AAuto.com https://trq.video/ia-1ASFK00772
New Control Arm with Ball Joint from 1AAuto.com https://trq.video/ia-1ASLF01009
New Control Arm with Ball Joint from 1AAuto.com https://trq.video/ia-1ASLF01010

This video shows you how to install new front lower control arms with ball joint from TRQ on your 2009-2014 Nissan Maxima. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.

This repair was done on a 2010 Nissan Maxima S 3.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2009 Nissan Maxima
2010 Nissan Maxima
2011 Nissan Maxima
2012 Nissan Maxima
2013 Nissan Maxima
2014 Nissan Maxima

Tools you will need:
• Pry Bar https://trq.video/oXD-1AXAA00020
• 19mm Wrench
• 21mm wrench
• 22mm Wrench
• 18mm Socket
• 21mm Socket
• 32mm Socket https://trq.video/oc3-1AAST00003
• Dead Blow Hammer
• Pliers
• 1/2 Inch Impact Gun
• 3/8 Inch Impact Gun
• Ratchet
• Torque Wrench https://trq.video/oaMZ-1AXAA00044
• Cotter Pin
• Gloves https://trq.video/oaoz-1AXSS00048
• Safety Glasses
• Floor Jack
• Hammer
• Jack Stands
• Rubber Mallet
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Nissan Maxima 7th Generation 2009 - 2014:    • Nissan Maxima 7th Generation 2009 - 2014  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.