Wookiee Lip Lift Mechanism

Описание: This video demonstrates how to install a lip lift mechanism into a Mask kit made by Josh Beckett (me). This particular mechanism involves numerous materials and details discussed throughout this tutorial. The overall object is to familiarize the viewer with installing a lip lifting system into a mask kit.

Thank you very much for tuning in and please add comments or questions down below.

Parts list (and links) to make this lip lift mechanism on your own:

Guide tubing:

OnFireGuy 1/16" x 15' (Feet) Medium Size Clear Vinyl Tubing for Fishing Lure Treble Hook Protectors https://www.amazon.com/dp/B00L5FXDXA/...

Cable Locks:

uxcell 5 Pcs 304 Stainless Steel Single Wire Rope Clip Cable Clamp Suit for 1mm-1.5mm Rope https://www.amazon.com/dp/B07HHYZDLD/...

Steel Cable:

DGOL 100 feet 5/128 inch (1 mm) Picture Hanging Wire 304 Stainless Steel Cable Rope,7x7 Standard Core,100 ft,with 10pcs Sleeves Stops https://www.amazon.com/dp/B07TX57Q9X/...

Cable crimps:

HIGOOD 1/16 Cable Ferrule 100PCS, Aluminum Crimping Loop Sleeve for Wire Rope https://www.amazon.com/dp/B07WPT65X4/...

STL file for the paddle and stand: $20

https://www.etsy.com/listing/93503056...

*The steel round bar use in the video is not longer needed with the STL file pin or the Clevis pin linked below. So it makes that step much easier...no gluing the round bar in place.

Clevis Pin (optional)

https://www.amazon.com/dp/B07MSJHHP1/...

Cotter Pins:

uxcell 1mm x 16mm Hair Pin Shaped Zinc Plated Cotter Clip Silver Tone 50pcs https://www.amazon.com/dp/B01BF1PMCI/...