How to fix my AIRMOTO PUMP with no air pressure. Newo P2-14 compressor.
Автор: Yuccaa
Загружено: 2025-10-17
Просмотров: 1050
Описание:
Dont throw it away, just watch this video a few times and find out what's wrong with your portable air pump by motoair .
you will need a new o ring. I couldn't find anything on Google that gave the exact measurements or size so I dug in myself.
the o ring pack I got from autozone. it was the assorted pack. but the one size that fit was the 11/16 1.7 cm (outside)| 1/2 1.27 cm (inside) | 2.3 MM THICK
there are 5 small screws that have to be removed and two cover plates on both ends in order to get to 4 of the screws. the plastic dial cover is also concealing one small screws as well.
once inside the pump you will have to remove two more screws which hold the entire compressor to the base. you have to disconnect one set of wires from the motherboard then turn over the compressor and remove four more small screws. turn it back over then remove the C clamp from the gearbox that holds the piston. You should be able to wiggle the top part of the compressor off also allowing you to pull the piston out the cylinder. replace the bad o ring then put back together.
music provided by Rolls Royce Records and artist yuccaa
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
