What do the DIY buttons do on LED lights | How many LED strips can you connect together

Описание: Minger LED Strip Lights Limited Time Discount: https://amzn.to/3dOgqG8


How many LED strips can you connect together?

We recommend no more than two consecutive strips connected end-to-end. If you do more, you need to add a separate power bus with higher gauge wire to run the strips down the line, or add additional power supplies down the line. With these strips, the data signal runs through the center wire on all the strips.


How do you connect LED strip lights to mains?

To get your strip light working, connect the transformer / driver to the strip light ( extending the cable with 2 core flex if necessary). Then you connect your transformer / driver to the mains via a plug or direct to the mains and you're away.


Can you cut LED light strips and still work?

Due to their design, LED Strip Lights will continue to work even after they have been cut. This is because their circuit is completely closed at each cutting point. If you are removing a section from the end of your strip light, always make sure you are cutting it at the end away from the connector.


Can you leave LED strip lights on all night?

Yes, LED lights are ideal for leaving on for long periods of time due to their low power usage and very low heat output. They are more suited to use as a night light/ background accent light in general.


What do the DIY buttons do on LED lights?

The DIY color setting buttons can be used to store your favorite color effects. Press a DIY button, for example DIY 1, to enter the DIY color mode. You can now adjust the brightness of the Red/Green/Blue color using the 6 arrow buttons until you have created your desired light effect.


Minger LED Strip Lights Limited Time Discount: https://amzn.to/3dOgqG8