Recycling Plastic baler MAC 108/2: the Macpresse multi-materialbaler for plastic, HDPE and PET

Описание: #AutomaticHorizontalBalers #Macpresse #MAC108/2 Plastic recycling baler MAC 108/2 is the Macpresse multi-material horizontal baler for baling plastic materials, recommended in particular for HDPE and PET.

MAC 108/2 is the horizontal automatic baler for those who have medium/high production requirements and who also need to obtain very high-density bales to reach the weight limits permitted in a container. To combine these two requests, our designers created the new machine so that it would reach a specific pressure up to more than 20 kg/cm2, with bale format of 110×75 cm to reduce the empty spaces in the cargo vehicles to a minimum. MAC 108/2 baling machine can reach densities above 500 kg/m3 with non-perforated PET; by adding the smaller bale size, optimized for transport efficiency (three rows vertically), the result is the possibility to load above 24 tonnes of PET on a truck. Thus the bales produced with this baler have very high density, ideal for arranging the maximum weight that can be loaded in a lorry and container.

In this video you can see our MAC 108/2 baling mixed plastics, PET bottles, HDPE and ferrous cans in a plant in Hungary. Plastic and ferrous waste is collected from the plant tipping floor and dropped in the apron conveyor hopper, then it's sorted manually to separate different materials. Finally they are compacted in bales, tied up with 4 or 6 steel baling wires and easily stored to be hauled by truck. Here you can find MAC 108/2 features for this plant:

Baler weight: 40.000 kg (88.184 lbs)
RAM force: 170.000 kg (374.800 lbs)
Feed opening: 2000x1020 mm (79"x40")
Bolted HARDOX plates: 400% longer lasting than standard steel
Cycle per minute: 5 sec
Volumetric production: 694 m3/h (24508 ft3/h)
High efficiency cutting V blades
Hydraulic unit soundproofed
Main motors power: 2x100 hp, 2x75 kw
Rexroth manifold block
Air to oil heat exchanger
Rotating counterpressure: 100 ton thrust, 220.400 lbs
7 Cleaning and maintenance inspection doors, that are larger than previous models, for better cleaning and maintenance
Main cylinder has an oscillating support
Proportional valve: automatic configuration of baling parameters
Scart plugs
Sheats for electric cables protection
Safety interlock switch
Baler remote control panel
Mobile tying unit for flexilibity of use and to optimise costs
Highg safety protections
Safety push button

►To learn more about http://www.macpresse.com/en/prodotti/...
►To learn more about Macpresse subscribe our channel and visit our website http://www.macpresse.com/en/

--------------------------------------------

For any other information, please, send us an e-mail: [email protected]
Keep in touch: subscribe our newsletter http://www.macpresse.com/en/macpresse...