Automatic Wire Mesh Shot Blasting Machine For Aluminum And Metal Thin Wall Workpiece Surface Clean
Автор: Foundry Machine&Shot Blasting Machine-Cassie
Загружено: 2022-10-11
Просмотров: 78
Описание:
Whatsapp:+8618765972210
Email:[email protected]
Wire belt blast machines can be used very flexibly. The workpieces can be blasted from above and below at the same time. These machines are used, for example, for deburring, descaling and cleaning of cast and laser-cut parts. We are often asked whether the wire belt does not leave a shadow on the workpiece surfaces. We have developed ways of at least largely avoiding this.
Wire mesh belt shot blasting machine is ideal for shotblasting of flat and very complex workpieces, which are fragile and would be damaged in a tumble blast machine. Parts can weight from 1 kg to 100 kg or more and are manufactured in medium and large series.
Operating sequence for wire belt blast machines
The workpieces actuate the switching threshold located in front of the inlet sluice for the automatic blast media supply of the running high-performance turbines. This ensures that blasting only takes place when workpieces are in the blasting area.
The inlet sluice is equipped with wear-resistant rubber curtains for sealing. After passing through the blast zone, the workpieces are conveyed to the blow-off device. The abrasive remaining on the workpiece surfaces is returned to the abrasive circuit here.
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
