Microsoft Windows 2008 Server R2 Demonstration & Configurations.

Описание: In This Tutorial I will show to you how to install Microsoft Windows 2008 Server R2.
Steps:
1.I Assume that you have already your OS and Rufus.
2.Rufus the OS to your Flash Drive and wait till it is finished.
3.Unplug your Flash Drive from your PC and Connect it to the USB port of the Other Computer Which you want to make a SERVER.
4.Boot your PC go to BIOS then change the first boot. Find your device and make it your First Boot priority. Wait for the “Press any key” to appear and just press he key you want to Press.

Now her we are in the Installation Process Just Follow the UNDERLINED Letter to be Pressed. Example: Alt + (Underlined Letter)

Partition your Hard Drive Depending on its Size Capacity and how many partition you want. Then wait till the Installation is being Processed.

While Waiting on the Installation Process, just finished your Cabling.

I Assume that you have finished your Cabling just use one straight through cable attached it to the Router and to your PC.

Now it is time to configure the Router Just Follow the Procedure.

Steps:
Just Remember that all you have to Change in this Router is Listed Below.

1.Reset your Router First of all
2.Change the SSID of your Router
3.Ensure that you have Checked (✓) the “ENABLE SSID 4.Broadcasting”
5.Have a Security “Password”
6.Change to Wpa/Wpa2 psk
7.Disable “DHCP”



Now Unplug the Cable and follow the Cabling Procedures

Steps:
Connect the Two (2) cables to the Ethernet port of your “SERVER & CLIENT”
Connect it to the Modular Box which is connected to the “PATCH PANEL”
Locate the Ports of the Connected Cable from your Server and Client.
Connect the extra two (2) Cable from the patch panel to your Switch/Hub
Then Finally Connect the last Cable from the Router to your Switch/Hub.

Steps of how to add some Given instructions or Software Changes in your SERVER.
Now let us return to the Server.
First of all, lets change the “IP ADDRESS” Given by your Assessor, Teacher or Instructor
Then after changing the IP address go to your computer + Properties + Change settings + Change. Now change the name of your Server Given by your Assessor, Teacher or Instructor. After Changing it let your Computer Restart.
Now go to windows logo type “DCPROMO” press ENTER.
Go to ADD “ROLES” put a Check (✓) on the Given roles to be installed.
Now click Windows logo + Group Policy Management + The Forest just Collapse it + FQDN “____.COM” right click on it then click New Organizational Units (OU’s) add the given OU’s then right click your folder Created then Click “Add GPO” example, “FOLDER NAME (Space) GPO” do it to all your OU’s Folder (Don’t Forget to Enforced)
Click Win. Logo + Computer + Local C:/ + New Folder + Copy the Folder name of your OU’s FOLDER.
Share your Folder
FOLDER REDIRECTION, Go back to your OU’s FOLDER click on it + right click your GPO + Right Click Edit + Folder + Documents + Right click Choose Basic then Follow Your Root Path. Do it to the other Ou’s Folder


How to locate Root Path.??? \\Your IP Address\ Then Deploy Your Printer.





Now you are Ready to connect your client to your Server.
How to connect to Server.

Steps:

Click Windows Logo + right click on Computer + change Settings + Change the Work group to Domain.
Just Type your FQDN on the Domain Text Box.

If Some instance there is an error just try going to
Open Network and Sharing Settings + Change Adapter Settings + click on your Adapter + Right click + Properties + IPV4+ Advance + DNS + Click Add then Type the IP ADDRESS of your SERVER. Now try to Connect it again to the Domain. :D

How to remote Pc?

Make Sure that you have Enabled Remote Connections and Allow other users to remote your PC. Just type the IP ADDRESS of the Pc you want to Remote. “Reminder Remote Pc only Work on LAN (Local Area Network) it must be in the Same Router connections. :D


If you Have any suggestions just comment Below or you can add me on Facebook

  / kinglyclub123