Clean and Restore

Описание: Fill a 5 gallon bucket with warm tap water, and pour in the two pouches of Wolman DeckBrite Wood Cleaner Coating Prep. Continuously stir the solution for 3-5 minutes. Initially, it will appear bright blue and the foaming will continue during stirring. The color blue will then disappear completely and is ready to be applied.
Pour the pail contents into the sprayer tank for easy application. If a sprayer is not available, a stain brush, mop or roller may also be used.
Lightly pre-wet the wood surface using a moderate nozzle setting. Sweep away any standing water.
Begin cleaning by spraying the DeckBrite end to end along the grain of each board length.Allow to sit and foam for 10 minutes. If the surface dries out prematurely,keep it wet with additional solution.
After 10 minutes, use the WOODWORX Deck Brush to briefly scrub the solution into the wood.
DeckBrite has oxygen-activated deep cleaning foam. It removes grayed surface, dirt and mildew stains. Because it is Chlorine and acid free, it is the safest wood cleaner to handle, use and rinse away. The solution is non-irritating to skin and eyes. And it is 100% biodegradable so it won't harm surrounding grass or plant life
Rinse the surface throughly with a garden hose after brushing.
Follow the same procedure for railings and spindles.
After 1-2 hours, the railing and deck will dry. The surface will appear clean, bright and free of mildew and algae stains. The wood surface is restored to its natural, like new look!