How To Replace Front Brakes On A Range Rover Sport Supercharged

Описание: Need to learn how the replacement of brake pads is done on a Range Rover Sport Supercharged?

Watch Doug, our Land Rover Master Technician, explain the difference between front brakes installed on a Range Rover Sport Supercharged 2006-2009 that is equipped with the Brembo brake calipers, as opposed to those front brakes on a Non-Supercharged Sport or LR3.

Doug will then show you the steps involved in removing and replacing with new brake pads and rotors (and new brake pad sensor). Atlantic British Ltd. stocks all the parts you need for this replacement.

Watch this video on RoverParts:
https://www.roverparts.com/resources/...

0:00 How to replace front brakes on a Range Rover Sport Supercharged
0:17 Difference between Brembo and standard brakes
0:54 Frequency of replacement of Brembo brakes
01:19 Remove pins and anti-rattle clip
02:53 Save pins and clean up to reuse
03:13 Cut pad sensor wire
03:21 Compress the 4 pistons before you remove the pads
04:29 Old pads slide out
05:06 Take off caliper and swing off to the side
07:13 Remove old rotor
08:54 Use small wire brush to clean up around the hub
09:32 Install new rotor
10:30 Re-install Brembo brake caliper
11:05 Brush off dirt and build up
11:32 Add on new brake pads
12:21 Install upper and lower pins, and anti-rattle clip
13:18 Put back wheel speed sensor
14:01 Replace pad depth sensor harness
14:32 Peel back liner to access sensor, replace, and reroute
19:51 Replace grommets holding liner
20:42 Order information

Please refer any questions or comments to 1-800-533-2210, or go to the questions tab at https://www.roverparts.com

Parts List:
https://www.roverparts.com/range-rove...
https://www.roverparts.com/brakes/pad...
https://www.roverparts.com/brakes/rot...

#atlanticbritish #brembobrakes #rangeroversportsupercharged