Rebuilding a classic Sheridan PGP Paintball Gun from Pursuit Marketing Inc.

Описание: In this video we rebuild a classic Sheridan PGP Paintball Gun from Pursuit Marketing Inc with the standard valve (not the cartridge valve).

For a video on bolt removal and cutting a quick strip slot watch this video:
   • Sheridan PGP or PMI Pump Paintball Gun Bol...  

I do not offer repairs through http://www.baccipaintball.com only parts but I can recommend http://www.Paintballtek.com if you aren't interested in doing the repair yourself.

This assembly will be the same on all shoot to pierce non cartridge valve sheridans such as the PGP, Pursuit Pistol, PMI 1, PMI 1 DF. K, K1, K2 and KP2s (and maybe some KP3s) use the same valve assembly but the breakdown to get to the valve is a little different.

Breaking down a Mac-1 Annihilator or Avenger would also be the same process.

In the video I discard the lead valve gasket which comes out of the valve when I remove the valve from the body of the PGP. This gasket is not needed. It may prevent over tightening on the valve but I always remove it when I rebuild an old gun.

Before attempting to knock your valve out make sure you remove the oring that gets sandwich between the valve and the brass valve casing. This is usually a hard oring to get out after it has been inside a gun for 20 years!

When you are reassembling your standard Sheridan valve be careful not to overtighten the valve retaining screw in the body.

Most stock spare hard parts for sheridans such valves, valve retaining screws, valve casings, valve casing heads, hammers, bolts, front and back top tube plugs are all available from baccipaintball at:
http://www.baccipaintball.com/parts/p...

You can find most of the valve parts referenced in this video at:
http://www.baccipaintball.com/parts/p...

And sheridan orings at:
http://www.baccipaintball.com/parts/p...

And sheridan orings at:
http://www.baccipaintball.com/parts/p...

Valve tools are available from Palmers at this link:
http://palmer-pursuit.com/cart/index....

And Palmers offers a rebuild kit for a standard sheridan shoot to pierce valve at this link:
http://palmer-pursuit.com/cart/index....

If you aren't comfortable rebuilding your PGP yourself you can always "call PaintballTek DOT com!" for some help at:
http://www.Paintballtek.com
Or visit Tim at Nor Cal Paintball in Vacaville Ca.
_________________________________________________________

Browse BacciPaintball's inventory of nearly NINE THOUSAND (9000!!!) vintage paintball items (paintguns, parts, air and memorabilia) at:
http://www.baccipaintball.com

And for Old News everyday on facebook visit:
  / baccipaintball  

Subscribe to Bacci Paintball on Youtube:
http://www.youtube.com/subscription_c...

Later style piercers for 12 gram sheridans.
http://www.baccipaintball.com/parts/p...