How to install a Pinlock® anti-fog lens
Автор: Pinlock
Загружено: 2025-02-26
Просмотров: 139206
Описание:
01. Remove the visor
Remove the helmet visor from the helmet as shown in the helmet manufacturer’s instructions.
02. Check the pin position
Check if the arrows on the Pinlock® pins in the visor are pointing outwards. If not, please check the lens adjustment manual.
03 Install the lens
Flex the helmet visor and place the lens between the two pins provided in the helmet visor, avoiding touching the lens surface. Place the silicon seal against the inside of the visor.
04.a Check the seal
Carefully allow the helmet visor to reacquire its curved shape. Check with natural light if the silicon seal on the lens makes full contact with the helmet visor. This is needed to create the thermal barrier.
04.b Not sealing correctly
If the silicon seal does not make full contact with the helmet visor, please check the lens adjustment
manual.
05. Protective film
Remove the protective film from the lens.
06 Reinstall the visor
Fit the helmet visor back on the helmet. Check if you can read the logo from the outside of the visor.
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
