Holley EFI's New Analog Digital Display Gauges in our 1974 C10 Square Body

Описание: We install Holley EFI Gauges in our 1974 C10 Square Body. Blake and Lucky Costa yank out the old cluster and custom fab a nice fitment of the new gauges keeping the stock look but utilizing current technology by Holley.


Part# 553-128
Part# 553-127
Part# 553-126
Part# 553-133
Part# 553-121
Part# 553-125
Part# 554-130
Part# 553-140
Part# 553-141
Part# 553-144

Blake @uglyduckjeep
Lucky @mobiletechlucky
Luck's Garage Show

https://www.holley.com/brands/holley_...

Just because you demand the most sophisticated electronic fuel injection technology available on the planet doesn't mean that you can't appreciate the subtle sophistication of a beautifully crafted analog gauge. In fact, purists know that while some information is well displayed in digits, other information is nearly worthless if you can't get a feel for the rate of change from the sweep of a needle.

If that paragraph describes you then your gauges have arrived. Holley EFI's new Analog Display Gauges use digitally-delivered information over Holley's sophisticated CAN bus but use a traditional sweep display. And while you can appreciate the beauty of nice analog gauge it is important to understand the additional benefits.

First, these all get their information from the Holley ECU, meaning that you don't have to run wires all over the vehicle to get the information you need. You get everything from the ECU itself.

Second, because it uses Bus communication technology, all you have to do is run a single CAN bus harness to the ECU and then daisy-chain the gauges. Did you ever think that installing gauges could be so easy?

And just take a look at that mounting system. Remember the old style gauges where you had to fumble with a pair of tiny nuts up behind the dash to install the gauge? Those days are gone and good riddance! These gauges feature a threaded body that allows a single bezel nut to hold the gauge firmly in place. Too easy.



www.holley.com
Holley is pleased to announce the continuing evolution of its very successful analog-style gauges with the release of new 3-3/8" and 4-1/2" speedometers and tachometers to complement our 2-1/16" gauge line. These are designed specifically for use with Holley EFI systems or as a standalone unit and available in both black and white face versions. These gauges are compatible with all Terminator, HP, Dominator, and Sniper ECU's, allowing them to be installed in a variety of Holley EFI equipped vehicles.
Features:
Does not require a transmission sensor to operate making installation easy in vehicles which lack electronic sensor output or for someone wanting a simple speedometer installation
Hot start satellite acquisition allows speedometer to function within 2-3 seconds of powering up
GPS antenna included with 15' cable to route antenna to convenient location in corner of dash
0-160 MPH range with multi-function LCD display screen including ¼ mile time, 0-60 time, current speed, mileage/trip odometer, direction, and time of day
Compatible with all Holley EFI touch screens, dashes, handheld tuners, and other CAN devices – Great for Holley EFI users looking to install a combination of needle gauges and LCD accessories
Slim-style mounting requires very little dash space for installation
240° sweep pointer from 8 to 4 o’clock makes gauges easy to read at a glance
Internal microprocessor ensures accurate pointer movement in street and racing conditions
Spin lock ring threads to back of gauge case for simple and secure gauge mounting
CNC machined billet aluminum bezels with anodized finish – Bezels are threaded for easy replacement
Multiple bezel options available separately – User can customize the gauges to their preference
Features:
Wires directly to sending unit, programmable for factory and aftermarket sending units with a range anywhere within 0-300ohms
Includes 12' shielded cable to connect directly to sending unit
270° sweep pointer from 6 to 3 o’clock makes gauges easy to read at a glance
Pointer is driven by a high-torque internal stepper motor to ensure accurate movement in racing conditions
Adjustable LED warning light allows user to set low trigger points
LED warning light brightness can be configured for both day and night
Spin lock ring threads to back of gauge case for simple and secure gauge mounting
CNC machined billet aluminum bezels with anodized finish – Bezels are threaded for easy replacement
Multiple bezel options available separately – User can customize the gauges to their preference.

Can be used with Sniper ECUs when used in conjunction with module part # 554-130.
Features:
Works with both distributor and distributor-less ignitions without requiring any special tach adapters
Practically universal, works with most gasoline engines and programmable from 0.5 - 6 PPR (Pulses Per Revolution)
0-8,000 RPM range
Compatible with all Holley EFI touch screens, dashes, handheld