Night FPV Hexacopter 100W LED spotlight drone bar test Tarot 680 Pro

Описание: Fly with 100W led spotlight bar on the drone build onf tarot frame.

10x 10W High Power Cold White Led like 20000K 1000LM with 60 degree convex lens
10x 10W / 12V LED Constant Driver Power like 900mA
Small piece of aluminum from local store
drill, some screws and cords , thermal paste
Connect drivers to led one by one .
Power drivers connection in parallel to LiPo, you can add some receiver controlled switch like this https://www.hobbyking.com/hobbyking/s... for remote control.

1. Aluminium pice min. 23x3cm , a minimum thickless 2-3mm - it must be rigid . You can do spotlights lamp with other dimension, or but aluminium priece right after you ger leds so you can match and form your lamp.
With the dimensions 23x3 , you mount LEDs on the one aluminium site and drivers on the other
2. example drivers like http://www.ebay.com/itm/1-pcs-10W-12V...
3. example leds like http://www.ebay.com/itm/Lots-10-PCS-1... or cheaper, you have to look in your local stores or ebay of course :)
4. switch https://www.hobbyking.com/hobbyking/s... as above
5. Connect all like i write in film description
6. Do not turn on lamp without aditional cooling for long time - you must control temperature of aluminium (aditional coolink : wind from the propellers, low ambient temperature )
7. Do not touch the led, after a few seconds are hot