Durafly D.H.100 Vampire V3 PNF "RAF Camo Edition" 70mm EDF RC Jet EPO 1100mm Maiden flight

Описание: Get your Vampire throu Petrincic Bros here: https://hobbyking.com/en_us/durafly-d...

Get your Flying Tiger radio tray and harness here: https://flyingtigerrc.com

Get your Petrincic Bros RC merch here: https://petrincic-bros-rc.creator-spr...

Petrincic Bros RC Tshirts and hats here: https://shop.spreadshirt.com/petrini-...

SPECIAL THANKS AND SALUTE TO PETRINCIC BROS BIGGEST SUPPORTERS ( DONATORS ):
-FREDERICK TICE
-MARK BAUER
-DANYEL VAN BEEK
-ANDY BUTLER
-KEITH GOODE

And ofcourse to all of you that come here, have fun with us, leave comment subscribe and give thumb up.

This third version of the Durafly DH 100 Vampire follows on from its predecessors to deliver a fantastic even better version of this popular EDF jet. We have added many more improvements so that the best has got even better. These new improvements include, additional carbon-fiber reinforcement, simplified and lighter landing gear struts, improved ducting and thrust pipe for increased performance, plastic nose for added protection, and plastic retract mount fairings.


This version of the Vampire DH100 is finished in an RAF camouflage color scheme, VX474 was an FB5 model of No 118 Squadron based at RAF Fassberg, Germany, in 1953, the yellow bands on the wings were Squadron markings, not training bands. Being one of the Air Force's first-ever jet fighters (the first to have a single jet engine), the Vampire had an outstanding performance and graceful lines, the pilots loved it. This Durafly version captures the graceful lines of this early jet fighter beautifully.


Under the hatch, the Vampire V3 has also been updated with an Aerostar 60A RVS G2 ESC, which can offer reverse thrust for braking when landing on tarmac/asphalt runways. The impressive 2836 3300KV brushless motor has been retained, as has the efficient 70mm fan unit, and the high-quality 9g servos. The Vampire V3 is made from tough EPO foam which is superbly finished in the painted camouflage scheme and also has factory-applied decals. As well as looking the part, it's easy to assemble, and the EDF unit, ESC, servos, retracts, and struts are all pre-installed at the factory.


Jets are about performance and the Durafly Vampire V3 will not disappoint. It has a fantastic climb rate due to being even lighter, and a great turn of speed. When you combine this performance with the uncanny scale-like sound, the result is one of the most realistic jets in its class. It has a wide, stable, flight envelope, fast passes are a dream, so are big loops and rolling maneuvers, and the slow speed handling combines to give you a very forgiving model. We recommend for best performance that you use a lightweight 2200mAh 4S LiPo battery, even with this battery you will achieve flight times of around 5 minutes with mixed-throttle use.


The Durafly D.H.100 Vampire V3 is the perfect choice for any budding jet jockey and experienced pilots alike. Its performance and handling make it one of the nicest EDF jets you are ever likely to fly, and is a must-have addition to everyone's jet hangar.


Features:
• Supplied as "Plug-N-Fly" with pre-installed EDF unit and motor, ESC, servos, and retracts
• Lots of carbon fiber reinforcement
• Smoother finish with clearer panel lines
• Updated 60A ESC with reverse, and integrated BEC
• Powerful 2836-3300KV brushless motor, and 70mm EDF unit
• V3 includes improved ducting and thrust pipe for increased performance
• Simplified and lighter landing gear struts


Specs:
Type: Durafly (PNF) D.H.100 Vampire V3 EDF Jet
Wingspan: 1100mm
Length: 888mm
Flying Weight: 1050g
EDF: 70mm 5-blade
Motor: 2836-3000KV brushless outrunner
ESC: Aerostar G2 RVS 60A w/reverse & UBEC
Servo: 4 x 9g
Retracts: 3 x servoless electric
Color Scheme: RAF camouflage


Included:
1 x Durafly D.H.100 Vampire V3 airframe in "RAF Camo" color scheme
1 x 70mm 5-blade EDF unit
1 x 2836-3000KV brushless motor
1 x Aerostar G2 RVS 60A ESC w/reverse and UBEC
4 x 9g servo
1 x Hardware pack
1 x Quick setup guide


Required:
5ch or more transmitter and receiver
1 x 4S (14.8V) 2200~3300mAh LiPo battery 30C minimum
1 x Suitable LiPo charger


Please note: A copy of the "Quick Setup Guide" and the full assembly manual are available under the "Manuals/Files" tab above.