How to Connect Washing Machine Water Pipe to Tap | Zero Leakage Installation Guide

Описание: Moving House? How to Reinstall Washing Machine Tap Adapter Correctly (DIY)

Washing Machine Tap Adapter Fitting | Water Inlet Hose Connection Guide (Tamil)
Are you shifting your washing machine to a new place or facing water leakage from the tap connection? Many people struggle to reconnect the water inlet hose properly after moving their machine.
​In this video, we demonstrate the step-by-step process of fixing the "Magic Adapter" (inlet hose adapter) to a standard tap. Follow these steps to ensure a tight, leak-proof connection without needing a plumber!
​Timecodes / Chapters:
0:00 - Prepping the adapter (Loosening screws)
0:33 - Adjusting the internal rubber bush
0:51 - Positioning the adapter on the tap
1:05 - Tightening the 4 screws evenly
1:28 - Locking the adapter (Crucial step to stop leaks!)
1:51 - How to clip the inlet hose to the adapter
​Key Steps to Remember:
​Loosen the Screws: Unscrew the 4 screws until they are flush with the inner plastic ring.
​Lower the Bush: Rotate the bottom silver ring anti-clockwise to lower the black rubber bush inside.
​Fix to Tap: Place the adapter on the tap mouth and tighten the 4 screws evenly so the adapter doesn't shake.
​The Secret Lock: Rotate the bottom plastic ring clockwise. This pushes the rubber bush up against the tap, sealing it completely to prevent leakage.
​Connect Hose: Pull down the lever on the hose connector and snap it into place.
​#WashingMachineRepair #TapAdapter #PlumbingDIY #HomeMaintenance #IFB #WashingMachineInstallation #NoLeakage