Hyundai Elantra (2016-2020) Front Bumper Replacement | Radiator Grill Removal

Описание: Learn how to remove and reinstall the front bumper on a Hyundai Elantra with this detailed, step-by-step tutorial. This guide covers how to safely detach all clips, screws, and connectors without damaging surrounding components. Perfect for anyone performing car repair or DIY maintenance at home, this video shows you how to remove front bumper and bumper removal procedures with confidence.

Hyundai Elantra AD (2016-2020) Service Manual / Front Bumper Replacement

0:00 Front Bumper Replacement - 2016-2020 Hyundai Elantra

Step 1: Loosen the four upper mounting bolts on the front bumper.
Step 2: Raise the vehicle using a lift for better access, then loosen the six clips securing the lower part of the bumper.
Step 3: Loosen the screws and pin-type retainers on each side of the bumper, then gently detach the side sections.
Step 4: Disconnect the front bumper connector on both the left and right sides.
Step 5: Finally, remove the entire front bumper cover.

0:54 Radiator Grill Replacement - 2016-2020 Hyundai Elantra

1. Begin by removing the front bumper.
2. Detach the wiring from the bumper.
3. Remove the fixing clip and the front bumper energy absorber.
4. With a screwdriver or trim remover, take off the radiator grille cover.
5. Loosen the grille’s mounting screws.
6. Gently lift the retaining clips and remove the radiator grille itself.

Support the channel — become a sponsor!
   / @ownersmanuals