Thermoplastic Injection Molding (TIM) & Overmolding | ASH Industries | Lafayette, LA

Описание: https://www.ashindustries.com/youtube

Why choose ASH for my Thermoplastic Injection Molding Needs? We have State-of-the-art Equipment, Focus on Timeliness, Strict Quality Checks, and Customer Focused Sales Staff. Thermoplastic injection molding also known as plastic injection molding, and overmolding are made well at ASH Industries. We have created innovative injection molding solutions through Metal Injection Molding (MIM), Liquid Silicone Injection Molding (LIM), Rotational Molding, and Thermoplastic Injection Molding.

https://www.ashindustries.com/youtube

Thermoplastic injection molding is a manufacturing process that creates fully functional parts by injecting plastic resin into a pre-made mold. Thermoplastic injection molding has several sub categories, such as rapid injection molding, which is best utilized in fine tuning prototypes prior to a product being given the go-ahead for production. Another sub category, production injection molding, is best utilized for full product runs.


------------------------------------------- Contents of Video -------------------------------------------

0:32 - ASH Industries - Thermoplastic Injection Molding Group

1:00 - How Thermoplastic Injection Molding works

1:20 - Cost - Design for Manufacturability (DFM) - material needs - reducing tooling cost

3:10 - Why getting wall thickness right is so important

3:47 - Building molds

4:28 - Overmolding, Insert mold, Two shot molding - combining processes - pad print, hot stamp, screen print, epoxy bond, or sonic welding


For more information visit:
https://www.ashindustries.com/youtube
https://www.thenerdtool.com/
👆 Fill out the form on this page to get your free N.E.R.D. sent to you!

At ASH Industries, we have the ultimate tool to help when you're designing your part. The N.E.R.D. (New Engineering Reference Device) demonstrates real world molded radii (both inner & outer), wall thicknesses, textures, absent & present weld lines, as well as demonstrations of sink & no sink. This clever device can save you thousands of dollars and prevent mistakes from happening.

Made in America: ASH® is proud to do all our injection molding manufacturing in America, no outsourcing. Every point of our process is done right here in the USA, at our product manufacturing facility in Louisiana. We work with clients all over the United States and can ship products nationally and globally.

MIM works similar to the other injection molding processes - powdered metal is combined with a binding material and then injected into a mold where it's left to form and curate. The end result is a metal part. The process is ideal for the short and long-run production of metal parts, especially those that are smaller in size and more detailed in terms of properties.

Silicone liquid injection molding, or LIM, is a manufacturing process commonly used to make silicone parts (considered a subset of rubber or thermoset) that need to withstand extreme conditions, regardless of the industry. The process is an injection molding process at heart, meaning that materials are injected into a pre-made mold, where heat accelerates part curing.

Ash Industries' Move-A-Mold™ program can help you begin production of your components within one week. If your group has existing molds and you wish to benefit from ASH’s talents, you can move your molds with absolute assurance that your needs will be given priority.

ROTO-XL™ represents ASH’s unique roto-molding division focusing on tooling & hollow thermoplastic components up to 18’ long and 52” in diameter. ROTO-XL™ molding is a cost effective alternative to injection molding for large plastic parts, components which must be hollow (such as berms, barrels, canoes, kayaks, slides), and those which may be made from commodity thermoplastics (polyethylene or polypropylene). During ROTO-XL™, the powdered thermoplastic is placed in the mold; the mold is closed, and it is spun in three axes while being heated. After the thermoplastic has been heated and spread evenly on the inner walls of the mold, the mold is then cooled, opened, and the part removed.

At ASH Industries we are always looking for ways to help you get real parts into your hands rather than waste money on 3D printing. If you 3D print parts to field test or to try something for a new product, you still have to spend the money to go into production. Our SuperMold™ program gives you the parts, tool and puts you in the spot to start production right away.


🟢 Watch next:    • Ash Industries Experts in Molding  

#AmericanManufacturing #ContractManufacturing #ManufacturingIndustry #PartGurus #design2part #injectionmolding #rotationalmolding #MIM #Supermold

1330 W. Willow St., Lafayette, LA 70506

Find out more at:
https://www.ashindustries.com/youtube