Code 3 Banshee Siren Amplifier System

Описание: http://sirennet.com/c33450.html The Code 3 Banshee Siren Amplifier System (Model 3450) is a revolutionary new amplifier system that significantly changes how warning sounds are utilized in emergency response. The Banshee amplifier system offers a selection of tones, features, and options that have never been available in one siren amp system before. The only siren amplifier system with dual tone capability, low frequency, electronic air horn, plus additional built in specialty tones all in one box. Unique tones or tone combinations: 3 low frequency tones and special tones such as CommandAlert and Air Horn, can be activated while your primary siren tone is running to really grab a driver's attention. Works with one set of standard size speakers saving you a tremendous amount of time on installation and space where the speakers are mounted. The Banshee is designed to work in conjunction with a Code 3 Z3 Siren but can be used with any industry standard siren. Adding a Banshee to your system provides phenomenal audio impact especially at intersections and when traveling through high ambient noise conditions.

Features:
Eight Universal Dual Tones (Wail, Yelp, Hyper-Yelp 1, Hyper-Yelp 2, Hi-Lo 1, Hi-Lo 2, Hyper-Lo 1, Hyper-Lo 2).
Three Low Frequency Tones (Synchronized 1/2 Frequency, Low Frequency Yelp and Low Frequency Wail).
Eight Low Frequency Time Out settings (7.5, 15, 22.5, 30, 37.5, 45, 52.5, and 60 seconds).
Operate the Electronic Air Horn independently of the primary siren (by itself as an alert) or with the primary siren.
Unique CommandAlert and Yelp Stop tones.
Universal Dual Tone operation with most industry standard sirens.
Additional tones are available when the Banshee operates with a Code 3 Z3 Siren.
Eight individual tones for each of the Code 3 Z3 tone push buttons (Wail, Yelp, Hyper-Yelp 1, Hyper-Yelp 2, Hi-Lo 1, Hi-Lo 2, Hyper-Lo 1, Hyper-Lo 2).
All inputs can be configured for positive or negative activation.
Comes with Banshee amplifier box, power control harness, and CAT5 cable.
The recommended speaker for use with this system is the Code 3 C3500U 100 Watt Speaker.

Specifications:
Operating Voltage: 10-16 VDC
100W: 8 Amps @ 13.6V with 11-ohm load (100 Watt Speaker)
200W: 14 Amps @ 13.6V with 5.5-ohm load (2-100 Watt Speakers)
Meets SAE J1849 and CA Title 13 when properly configured
Amplifier dimensions: 8.5" L x 2.8" H x 5.7" W.
Amplifier weight: 3.2 pounds

Code 3 Five Year Warranty