Programming a Metered Fleck 5600 Timer Regeneration Cycle

Описание: This is the Original manufacturer ( Fleck ) training video explaining how to program a Metered Fleck 5600 timer regeneration cycle.

Also, see this ARTICLE for more details =
https://www.softenerparts.com/fleck_m...

For all your Water Softener needs visit us at : www.softenerparts.com

Computing Gallon Setting
Take the grains capacity of your resin tank times 75% ( 0.75 ) divided by hardness ( in grains ),
then subtract 75 gallons per person using the water as a reserve.

Example: 32,000 grains x .75 = 24,000 divide by 20 grains hardness = 1,200 gallons - 150 ( 2 people ) = 1,050 setting.

You set the gallons by lifting the clear portion of the program wheel, and align the white dot with the number of gallons you wish the unit to use prior to initiating a regenerate ( the night following the meter reaching Zero ).

Also the salt setting should be 9 lbs. per cu. ft. of resins ( 32,000 grains ).
You can find this adjustment on the "Brine Cam" gear inside the back of your control head. It is a small halve moon shaped piece that it held on to the Brine Cam with one screw. It has a small pointer which indicates the pounds of salt to be used per regeneration.

If you do not know your resin tank capacity, send us the tank's height and diameter, and we will let you know how much resin is normally used in your size tank. We will also do the rest of the math for you, if provide the hardness & iron levels ( note: most "city" water does not contain iron ). Also, you might need to know that 17.1 ppm of hardness = 1 grain of hardness.